ADTRAN 1204025L1 Datasheet download pdf (Page 29)

Chapter 2 Installation

UNPACK AND INSPECT

Carefully inspect the T1 ESF CSU ACE for any shipping damages. If damage is suspected, file a claim

immediately with the carrier and then contact ADTRAN Technical Support. If possible, keep the original

shipping container to ship the T1 ESF CSU ACE back for repair or to verify damage during shipment.

Shipped by ADTRAN

The following items are included in the ADTRAN shipment:

• The T1 ESF CSU ACE

• Line interface cable: an 8-position/modular to 8-position/modular

• 12 VDC power supply

• TSU Single Port Family System Manual CD

Provided by Customer

The following items must be supplied by the customer:

• DTE cable(s)

• Cable for the EIA-232, if used

POWER CONNECTION

The unit may be powered by using the supplied NEC Class 2, 12 V wall mount power supply. It may also

be locally powered by own 12 to 48 V power supply. Once power has been applied to the unit, the PWR

LED illuminates.

The unit can be powered by either of the following methods:

Method 1

• Use the included NEC Class 2, 12 V at 800 mA wall mount power supply.

Note: The wall outlet shall be near the equipment and readily accessible.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 65 66

No comments

ADTRAN 1204025L1 Datasheet Page 29