ADTRAN ATLAS 810 Plus Specifications download pdf (Page 70)

Chapter 6. Terminal Menu and System Control

6-18 ATLAS 810

PLUS

User Manual 61200266L1-1

»» Current Update

Status

Read security: 5

Indicates progress or problems encountered during the current update pro-

cess. The field displays

Idle

if no update is in progress or when the update

is successfully completed. At the end of a successful update, the contents of

this field are copied into

Previous Update Status

If you are updating several modules at the same time (if

Module Slot

is set

All Modules of a Type

), this option displays

[+], indicating this field con-

tains submenu items. The following submenus display:

Slt

Indicates the slot number.

Type

Defines the type of module for each slot.

Current Status

Indicates the status of the current update.

Previous Status

Indicates the status of the previous update.

Previous Time

Indicates the time of the previous update.

During the TFTP upload process, various status messages are provided in

Current Update Status

(see Table 10-1 on page 10-5).

»» Previous Update

Status

Read security: 5

Displays the status of the previous update, after selecting a module slot. If a

firmware update has not been attempted for a particular slot, this field

reads

Has not been attempted. Following a successful update, the field reads

Module Update Complete. If an update was unsuccessful, the appropriate

error message displays.

»» Begin Firmware

Update

Write security: 1; Read security: 5

Begins updating the firmware for the selected modules. To start this action,

enter

Y to begin or enter N to cancel. You can also cancel the operation after

the update has begun. For XMODEM updates, cancel the process via the

terminal emulation software (consult your documentation for information

on how to do this). For TFTP updates, you can cancel the process by select-

ing

Cancel Update

from this field.

» Update Status

Read security: 5

Displays the status of the current firmware update. These fields are identi-

cal to those defined in Current Update Status on page 6-18.

» Config Transfer

Write security: 3; Read security: 5

Used only with TFTP transfers. Sends a file containing the ATLAS 810

PLUS

configuration to a file on a TFTP Server using the TFTP protocol through the

10BaseT Ethernet port.

Config Transfer

also lets you save the

ATLAS 810

PLUS

configuration as a backup file, so you can use the same con-

figuration with multiple ATLAS 810

PLUS

units. In addition,

Config Trans-

fer

can retrieve a configuration file from a TFTP Server.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 187 188

Comments to this Manuals

No comments

ADTRAN ATLAS 810 Plus Specifications Page 70

Comments to this Manuals

Related products and manuals for Networking ADTRAN ATLAS 810 Plus