Chapter 6. Configuration
24 ISU 128 User Manual 61202.029L2-1
Figure 6-2
VT 100 Configuration Screen
Switch Protocol
Find out what kind of ISDN switch your local CO is using by asking the tele-
phone administrator or telephone company representative. Configure the ISU
128 for either a Northern Telecom DMS-100
®
, AT&T 5ESS
®
switch, or a switch
conforming to the National ISDN-1 standard (usually an AT&T 5ESS, NTI
DMS-100, or Siemens EWSD). In the Far East, configure for the NEC switch.
Call Type
The call type can be configured four different ways, depending on the type of
service used: speech, audio, data 56 kbps, or data 64 kbps.
When placing outgoing calls using the optional V.34 modem, the unit must be op-
tioned for either speech or audio call type.
Speech
Speech directs the call control software to request a Mu-law/A-law speech cir-
cuit as the bearer capability for outgoing calls. The Speech option is used with
an ISDN line configured for voice service. In some areas voice service costs
Comments to this Manuals