ADTRAN TSU 600 User Manual

61200.076L2-1BJuly 1997TSU 600USER MANUALPart Number 1200076L2 1200076L2#DC

Table of ContentsStep 3. Select the number of DS0s/Port:_____12___ ...87Step 4. Complete the DS0 Map Configuration ...

Chapter 4. Example Operations88 TSU 600 User Manual 61200.076L2-1(1.1 - Nx56/64).Step 4. Complete the DS0 Map ConfigurationTable 4-C provides inform

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 89Step 5. Complete a Configuration Table for the DSX-1 PBX PassthruTable 4-D provi

Chapter 4. Example Operations90 TSU 600 User Manual 61200.076L2-1CONFIGURING THE NETWORK INTERFACEPlace the cursor on 1)NETWORK (NI) with the number

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 91Figure 4-4First Two Network (NI) Menu Items

Chapter 4. Example Operations92 TSU 600 User Manual 61200.076L2-1CONFIGURING THE DS0 MAPFrom the first menu position scroll down or usenumber 5 to se

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 93According to the DS0 Map work sheet, Passthru forthis DS0 should be set to Y for Yes

Chapter 4. Example Operations94 TSU 600 User Manual 61200.076L2-1This operation (changing the DS0 number and copy-ing) can be repeated for DS0s 3 thr

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 95TEMPORARY MAPThe TSU 600 is now holding the newly created DS0Map A in a file as a te

Chapter 4. Example Operations96 TSU 600 User Manual 61200.076L2-1EditThe Review reflects that one of the DS0s is still pro-grammed as Idle, and since

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 97Figure 4-12Window Showing the ErrorTo correct the setting press Enter twice to advan

Table of ContentsFigure 1-15. Drop and Insert, Voice, and Bridging Application Set Up ...23Figure 1-16. Variations of Mixed Applications ...

Chapter 4. Example Operations98 TSU 600 User Manual 61200.076L2-1Configuring the PortsScroll down or use the number 7 to move the cursor to7)PORT CON

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 99Scroll to continue viewing the remainder of the menuselections, comparing all the se

Chapter 4. Example Operations100 TSU 600 User Manual 61200.076L2-1TESTING EXAMPLEIf the example operations in the preceding pages werefollowed, the T

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 101Figure 4-15Test Menu OneThe unit begins a display of the submenu items. Theselecti

Chapter 4. Example Operations102 TSU 600 User Manual 61200.076L2-1ES BES SES SYNCNO TEST DS0sNO TEST PATTERNNONENOARSS TST DS0sQRSS ALL DS0sNO LOOPBA

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 103With the cursor on 1)REMOTE LOOPBK, Enteractivates the submenu. Scroll to select

Chapter 4. Example Operations104 TSU 600 User Manual 61200.076L2-1The results of this check are shown under submenuitem 4)PATTERN RESULTS (see Figure

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 105Test TerminationSelect TEST PATTERN name and deactivate theremote loopback by selec

Chapter 4. Example Operations106 TSU 600 User Manual 61200.076L2-1

Appendix A. TSU 600 Menu Tree61200.076L2-1 TSU 600 User Manual 107Appendix ATSU 600 Menu TreeThis appendix contains the complete menu tree for theTSU

Table of ContentsFigure 4-19. Test Pattern Results Display ...104Figure A-1. TSU 600 Complete Menu Tr

Appendix A. TSU 600 Menu Tree108 TSU 600 User Manual 61200.076L2-12) CONFIG 2) UNIT5) DS0 MAP A 6) DS0 MAP B 1) NETWORK (NI)1) FORMAT2) CODE3) YE

Appendix B. DTE Data Rate Chart61200.076L2-1 TSU 600 User Manual 109Appendix BDTE Data Rate ChartThis appendix contains the DTE data rate chart.

Appendix B. DTE Data Rate Chart110 TSU 600 User Manual 61200.076L2-1Table B-ADTE Data Rate vs. DS0s# OF DS0s (N) DTE RATE=56K DTE RATE=64KN=1 56K 64K

Appendix C. System Configuration Charts61200.076L2-1 TSU 600 User Manual 111Appendix CSystem Configuration ChartsThis appendix contains five steps/ta

Appendix C. System Configuration Charts112 TSU 600 User Manual 61200.076L2-1Step 2: Configure DTE PORT: (1.1 Nx56/64)Table C-BConfiguration Chart f

Appendix C. System Configuration Charts61200.076L2-1 TSU 600 User Manual 113Step 4: DS0 Map A ConfigurationTable C-CDS0 Map A ConfigurationDSO # ASS

Appendix C. System Configuration Charts114 TSU 600 User Manual 61200.076L2-1

Appendix D. TSU 600 System Messages61200.076L1-1 TSU 600 User Manual 115Appendix DTSU 600 System MessagesThis appendix lists and defines the alarm a

Appendix D. TSU 600 System Messages116 TSU 600 User Manual 61200.076L1-1

61200.076L2-1 TSU 600 User Manual 117IndexIndexSymbols511 pattern 20Aactive alarms 55ADTRAN PC program 9alarm 41, 42, 56, 59active 48, 55history

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 1Chapter 1IntroductionT1/FT1 OVERVIEWThe T1 digital communications link has been used bytele

118 TSU 600 User Manual 61200.076L2-1IndexDS0 map20, 33, 41, 49, 64, 65, 66, 81, 88, 92, 95, 96, 97configuration example 85, 92switch (Auto/Ma

61200.076L2-1 TSU 600 User Manual 119Indexclear 42copy 41enter 42home 41keypad 42remote 41shift 42up and down arrows 42Ppasscode 73setting 3

120 TSU 600 User Manual 61200.076L2-1Indextestingnetworkloopback tests 78QRSS pattern 80QRSS results 80QRSS results cleared 81overview 17selectin

Product Support InformationPresales Inquiries and Applications SupportPlease contact your local distributor, ADTRANApplications Engineering, or ADTRAN

Chapter 1. Introduction2 TSU 600 User Manual 61200.076L2-1performance of their service offering. Since theintroduction of ESF, equipment that is in

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 3TSU 600 OVERVIEWA functional description of the T1 multiplexers, adescription of the TSU 60

Chapter 1. Introduction4 TSU 600 User Manual 61200.076L2-1The TSU 600 serves as the link between user datasources such as local area network (LAN) br

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 5Identification of Rear Panel LayoutThe configuration of the rear panel of the TSU 600ACand

Chapter 1. Introduction6 TSU 600 User Manual 61200.076L2-1Features of the TSU 600The TSU 600 offers the following features:• A DS1 interface and a 60

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 7TSU INTERFACESThe TSU 600 is equipped with six slots in the rearpanel to house option modul

Table of Contents901 Explorer BoulevardP.O. Box 140000Huntsville, AL 35814-4000Phone: (205) 963-8000© 1997 ADTRAN, Inc.All rights reserved.Printed i

Chapter 1. Introduction8 TSU 600 User Manual 61200.076L2-1Control Port InputThe control port input provides the following func-tions:• RS-232 input f

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 9THREE METHODS OF CONTROLFront PanelThe front panel provides complete and easy control ofall

Chapter 1. Introduction10 TSU 600 User Manual 61200.076L2-1OPTION SLOT ARRANGEMENTAs viewed from the rear of the TSU 600, the slots arenumbered as sh

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 11Slot 6Slot 6 services any option module type includingsecondary network interface ports (D

Chapter 1. Introduction12 TSU 600 User Manual 61200.076L2-1OPTION PORTSThe option ports vary depending on the optionmodules installed.Secondary Inter

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 13TSU 600 CLOCK SOURCESThe TSU 600 is operable from various clock sourcespermitting it to pe

Chapter 1. Introduction14 TSU 600 User Manual 61200.076L2-1DTE TimedThe DTE is the source of timing. The TSU 600 uses theincoming DTE clock to deter

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 15Internal TimingThe TSU 600 is the source of timing. The TSU 600 isconfigured to use its o

Chapter 1. Introduction16 TSU 600 User Manual 61200.076L2-1Normal (CSU) TimingThe typical timing option arrangement is shown inFigure 1-8. The PBX i

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 17TSU 600 TESTINGThe TSU 600 offers three forms of testing:• Self test• Loopback tests (loca

Table of ContentsFCC regulations require that the following information be provided to thecustomer in this manual.1. This equipment complies with Par

Chapter 1. Introduction18 TSU 600 User Manual 61200.076L2-1Classes of LoopbacksThere are two classes of loopbacks: network interfaceand DTE interfac

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 19The TSU 600 also activates a port loopback when the DTEloopback is asserted. TSU 600T1Nx56

Chapter 1. Introduction20 TSU 600 User Manual 61200.076L2-1Pattern GenerationThe TSU 600 offers two available test patterns: QRSSand 511.QRSS Patter

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 21TSU 600 CONFIGURATION APPLICATIONSThe following examples illustrate possible configura-tio

Chapter 1. Introduction22 TSU 600 User Manual 61200.076L2-1All Voice ApplicationIn this application 24 voice channels are provided fortelephones and

Chapter 1. Introduction61200.076L2-1 TSU 600 User Manual 23Drop and Insert, Voice, and Bridging ApplicationThe TSU 600 provides a bridge interface wi

Chapter 1. Introduction24 TSU 600 User Manual 61200.076L2-1CorporateTSU 600 supports LAN bridge with base Nx. The PBXsystem uses the DSX-1 module.

Chapter 2. Installation61200.076L2-1 TSU 600 User Manual 25Chapter 2InstallationUNPACK, INSPECT, POWER CONNECTIONCarefully inspect the TSU 600 for an

Chapter 2. Installation26 TSU 600 User Manual 61200.076L2-1Power ConnectionThe AC powered TSU 600 is equipped with a captiveeight-foot power cord, te

Chapter 2. Installation61200.076L2-1 TSU 600 User Manual 27WARRANTY AND CUSTOMER SERVICEADTRAN will replace or repair this product withinfive years f

Table of Contents

Chapter 2. Installation28 TSU 600 User Manual 61200.076L2-1GROUNDING INSTRUCTIONS (UL 1459)Grounding instruction information from theUnderwriters&apo

Chapter 2. Installation61200.076L2-1 TSU 600 User Manual 29tional Electrical Code, ANSI/NFPA 70. Termination ofthe supplementary equipment grounding

Chapter 2. Installation30 TSU 600 User Manual 61200.076L2-1WIRINGNetworkOn the rear panel the TSU 600 is an eight-positionmodular jack labeled NETWOR

Chapter 2. Installation61200.076L2-1 TSU 600 User Manual 31Control In/Chain-inThis is used as an RS-232 port for connection to acomputer or modem (Co

Chapter 2. Installation32 TSU 600 User Manual 61200.076L2-1Chain-outThis is used to connect to another TSU 600 Chain-inconnector. See Table 2-C for

Chapter 2. Installation61200.076L2-1 TSU 600 User Manual 33POWER UP TESTING AND INITIALIZATIONWhen shipped from the factory, the TSU 600 is set tofac

Chapter 2. Installation34 TSU 600 User Manual 61200.076L2-1Set User PasscodeThe TSU 600 is designed to operate with or withoutthe use of a password.T

Chapter 2. Installation61200.076L2-1 TSU 600 User Manual 35No Passcode DesiredAt the New Passcode prompt (in the Set Passcodemenu), press Enter witho

Chapter 2. Installation36 TSU 600 User Manual 61200.076L2-1Set Control PortThe TSU 600 can be configured from the control portonly when a unit ID nu

Chapter 2. Installation61200.076L2-1 TSU 600 User Manual 37 TSU 600PC or ModemControlInputChainOutputTSU 600/TSU 100/TSUChainInChainOutputTSU 600/TSU

Table of ContentsTable of ContentsChapter 1. IntroductionT1/FT1 Overview ...

Chapter 2. Installation38 TSU 600 User Manual 61200.076L2-1Normal Power-Up ProcedureAfter the unit has been put into operation with theinitial power-

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 39Chapter 3OperationOPERATIONThe TSU 600 can be configured and controlled by twodifferent metho

Chapter 3. Operation40 TSU 600 User Manual 61200.076L2-1OK• 1MODULE TESTTSU 600ALARMOK• 2 TEST ALARMOK• 3 TEST ALARMALARMERRORTESTCOPY HOME SHIFTOKRE

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 41• Test (yellow)Indicates that one of the interfaces is operating in atest mode. This include

Chapter 3. Operation42 TSU 600 User Manual 61200.076L2-1AlarmUsed as quick access to the active alarm displaymenus. This can be activated while any

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 43General Menu OperationThe TSU 600 uses a multilevel menu structure contain-ing both menu item

Chapter 3. Operation44 TSU 600 User Manual 61200.076L2-1The unit responds by displaying the first two sub-menu items (in this example, on the Configu

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 45Display Only Data FieldsData fields preceded by an equal (=) symbol cannot beedited. See Fig

Chapter 3. Operation46 TSU 600 User Manual 61200.076L2-1DSX-1 option card with an Nx56/64 plug-on interfaceis installed in option slot 6, it would be

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 47MENU STRUCTUREThe TSU 600 uses a form of hierarchical menus toaccess all features. The topmo

Table of ContentsLoopback Tests ...17Classes of Loopbacks ...

Chapter 3. Operation48 TSU 600 User Manual 61200.076L2-1The opening menu display as seen in Figure 3-7 is theaccess point to all other operations. T

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 49View HistoryThis menu item displays date and time history of upto 20 status changes of the un

Chapter 3. Operation50 TSU 600 User Manual 61200.076L2-1Utility (UTIL)The Utility menu is used to view and to set systemparameters. This menu includ

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 51TestThe execution of tests will disrupt some normal operations.See individual menu items conc

Chapter 3. Operation52 TSU 600 User Manual 61200.076L2-1STATUSThe Status menu branch provides the ability to viewthe status of the TSU 600 operation.

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 53Network Performance Reports (NI PERF RPTS)The Network Interface Performance Reports displayth

Chapter 3. Operation54 TSU 600 User Manual 61200.076L2-1SES Number of severely errored seconds(more than 320 errors/second)UAS: Number of unavailable

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 55*Figure 3-10Network Interface Error TypeThe asterisk (*) above an item indicates the type ofe

Chapter 3. Operation56 TSU 600 User Manual 61200.076L2-1Alarm SourceAlarm MessageFigure 3-11Display of Alarm MessagesIn addition to normal menu opera

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 57With the cursor on Main menu item 1)STATUS,activate the menu with Enter or number 1. The uni

Table of ContentsNo Unit ID Desired ...35Set Control Port...

Chapter 3. Operation58 TSU 600 User Manual 61200.076L2-1CONFIGURATION (CONFIG)The Configuration menu is used to set the TSU 600operational configurat

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 59Network (NI)This menu item accesses the configuration of param-eters associated with the netw

Chapter 3. Operation60 TSU 600 User Manual 61200.076L2-1XMIT PRM• Enables and disables the sending of PRM data onthe facility data link (FDL). The P

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 61UnitThe Unit menu is used to change the baud rate of theControl In port and the setup of the

Chapter 3. Operation62 TSU 600 User Manual 61200.076L2-1 Map Exchange (Map Xchng)The Map Exchange menu is used to enable and set theautomatic time of

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 63When Auto is selected the unit displays the screens toset times for switching. See Figure 3

Chapter 3. Operation64 TSU 600 User Manual 61200.076L2-1Map In Use: A(B)This menu item is used to control the DS0 map usedby the TSU 600 and to disp

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 65OperationThe operation of DS0 Map A and Map B is identical.With the cursor on 5)DS0 MAP A, pr

Chapter 3. Operation66 TSU 600 User Manual 61200.076L2-1Select DS0 NumberPassthruYes or NoSelect PortFigure 3-16CREATE TEMP Selection ScreenUse eithe

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 67With the cursor on 3)REVIEW press Enter or number 3to display the first of the assigned ports

Table of ContentsActive Alarms ...48View History ...

Chapter 3. Operation68 TSU 600 User Manual 61200.076L2-1APPLY TEMP > AWrites the TEMP map into Map A. Apply is usuallythe last step in updating a

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 69PORT CONFIGURATION (PORT CONFIG)Port Configuration is used to select and configure theparamet

Chapter 3. Operation70 TSU 600 User Manual 61200.076L2-1UTILITY (UTIL)The utility menu tree is used to view and to set systemparameters (see Figure 3-

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 71Time/DateThis menu option is used to view or to edit the currenttime and date. The time and

Chapter 3. Operation72 TSU 600 User Manual 61200.076L2-1Factory RestoreThis menu item is used to restore the factory defaultsetting for all unit param

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 73Set PasscodeEnter Passcode from Other MenusThe appearance of the Passcode prompt may make anu

Chapter 3. Operation74 TSU 600 User Manual 61200.076L2-1Unit ID: IDThis menu is used to access the current Unit IDsetting. Viewing is available in l

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 75Software Revision (Software Rev)This menu provides access to the display of thecurrent softwa

Chapter 3. Operation76 TSU 600 User Manual 61200.076L2-1PORT UTILITYThis menu provides access to the display of thecurrent software information for ea

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 77TESTThe Test menu is used to initiate different types oftests of the unit and to view test re

Table of ContentsMap In Use: A(B) ...64Operation ...

Chapter 3. Operation78 TSU 600 User Manual 61200.076L2-1Network TestsNetwork tests are used to control the activation ofloopbacks and the initiation o

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 79REMOTE LOOPBCKThis activates the same loopbacks as Local Loopbackbut at the far end. It uses

Chapter 3. Operation80 TSU 600 User Manual 61200.076L2-1PATTERNThis sets the pattern for the test and initiates thetransmission of the pattern. The t

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 81*Figure 3-21Test Pattern Results DisplayES The number of seconds with at least 1bit error.BES

Chapter 3. Operation82 TSU 600 User Manual 61200.076L2-1Run SelftestThis menu selection is used to execute a full internalself test. The results of t

Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 83Port TestsThe Port Tests menu is used to activate testing ofspecific data ports. It controls

Chapter 3. Operation84 TSU 600 User Manual 61200.076L2-1

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 85Chapter 4Example OperationsThis chapter provides examples of how to configurethe sys

Chapter 4. Example Operations86 TSU 600 User Manual 61200.076L2-1STEPS TO SET UP VOICE AND DATA MIXThe five steps required to set up voice and data m

Chapter 4. Example Operations61200.076L2-1 TSU 600 User Manual 87Step 2. Configure DTE Port (1.1 - Nx56/64) (From Option Module)Table 4