ADTRAN XRT Installation Manual

LavaPort-PnPInstallation ManualRev. B00LAVACOMPUTERSLAVA LINK-650 PNPP.N.MOKO L67.2MADE INCANADA

10Setting LavaPort FIFO Control

11The LavaPort-PnP incorporates a 16650 UART chip with a 32-byte FIFO(first-in-first-out) buffer.The FIFO control tabs set the buffer “trigger” levels

12Flow Control refers to the type of signaling that is used between themodem and the LavaPort.If you are connecting the LavaPort to a modem or ISDN te

13

14The Resources Tab will show you how the LavaPort ISA has configureditself.This tab should be used for information purposes only, andsettings should

15The LavaPort-PnP supports data rates up to 460.8 kbps, including 115.2kbps and 230.4 kbps. However, not all modems support Com Port ratesabove 115.2

16Because some modems support data rates higher than 115.2 kbps, butrequire special settings (AT Commands) and INF files for configuration,Lava has in

17To install the Lava Modem Speed Set utility on your hard drive, insert theLavaPort diskette into your floppy drive, click Start, Run and typeA:\Util

18This page intentionallyleft blank.

19This page intentionallyleft blank.

2Congratulations on your purchase of the LavaPort-PnP Com PortAccelerator for 56K and ISDN external modems and other high-speedserial peripherals.Incl

Lava Computer MFG Inc.LavaTechnical Support9:00 am to 5:30 pm Monday to Friday (Eastern Time)Tel: +416 674-5942Fax: + 416 674-8262E-mail: tech@laval

3ContentsQuick Install – Windows 95/98/MEHardware InstallationWindows 95/98/ME Installation· Setting LavaPort Data Rates· Setting LavaPort FIFO Contro

4Quick InstallWindows 95/98/Me1. With the power off, insert the LavaPort-PnP card into any free ISAslot.2. Launch Windows95/98/ME – new hardware will

5Hardware Installation1. Before opening the casing of your computer, make sure that allpower is off.2. Locate an unused ISA slot and insert the LavaPo

6Windows Driver Installation1. Once the LavaPort-PnP is installed in your PC, turn on yourcomputer.Windows will automatically detect the LavaPort-PnP

73. Click on the Start button, then choose Settings, Control Panel,System, Device Manager.Click on Ports and select the LavaPort-650ISA.4. Click Prope

8Setting LavaPort Data Rates

9The data rate of the LavaPort may be set using the Bits per Second pulldown menu.Please note that this menu will also appear when setting the“PortPro