Adtran TSU 120e User Manual download pdf (Page 49)

Chapter 3. Operation

61202129L1-1 TSU 120 User Manual

3-11

T-WATCH Pro/EIA-232 Connection

To set up the TSU 120e to work with T-WATCH Pro over a

direct EIA-232 connection, follow these steps:

SNMP

The ADTRAN TSU 120 supports the Simple Network Manage-

ment Protocol (SNMP) through the chain-in (SLIP) interface.

The TSU 120e offers a 10BaseT connection which also supports

SNMP. For more information on SNMP see Appendix A, Under-

standing SNMP on page A-1.

To use SNMP via 10BaseT (TSU 120e only), follow these steps:

Step Action

1 Set the Unit ID and set a passcode using the front

panel. See Unit ID on page page 6-4 and Set a Passcode

on page 6-4 for details.

2 Set the control port rate to the same setting as the PC

Com port.

3 Connect the PC Com port to the chain-in port on the

TSU 120 using the DB25 adapter and modular cable

provided.

4 Follow the installation instructions for T-WATCH Pro

to start the program and to connect to the unit.

Step Action

1 Set

ONTROL

ORT

ORMAL

2 Set the

ADDRESS

DEFAULT

GATEWAY

, and

SUBNET

MASK

3 The appropriate MIB browser must be loaded into the

Network Management Station (available on the

ADTRAN webpage at http://www.adtran.com).

4 The MIB browser issues SNMP gets/sets to the TSU

120e.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 139 140

No comments

Adtran TSU 120e User Manual Page 49