ADTRAN ATLAS 800 SERIES User Manual download pdf (Page 28)

Chapter 3. Operation

28 ATLAS 800 Series Video Module User Manual 61200773L1-1A

ODULES

The ATLAS 800 Series system controller automatically detects the presence of the

Video Module when it is installed in the system. To see the menus for the Video

Module via the terminal menu, use the arrow keys to scroll to the Modules menu and

press Enter to access the module choices. Figure 3-1 shows the Modules menu (see

also the menu tree in Appendix C). The following sections describe all the Modules’

menu options.

Figure 3-1. Modules Menu

SLT

Read security: 5

Displays the number of the available slots in the ATLAS 800 Series chassis. Slot 0

refers to the ATLAS 800 Series unit. This field is read-only.

TYPE

Write security: 3; Read security: 5

Displays the type of module actually installed in the slot or the type of module you

plan to install in the slot. If a Video Module is installed, the Type field automati-

cally defaults to VIDEO (the Video Module). You can use this field to preconfigure

a system before actually installing modules by simply specifying the module that

you want to install in each slot.

Displays additional status and configuration menus for the selected module. (To ac-

cess the submenus for this item, use the arrow keys to scroll to the MENU

column for

the module you want to edit, and press

Enter

.) For detailed information on each sub-

menu item, see the section See “Modules/Menu” on page 30.

YPE

automatically displays the name of an installed module. If

you want to change this field to a different type of module, you

must set T

YPE

to E

MPTY

before selecting the other module.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 49 50

No comments

ADTRAN ATLAS 800 SERIES User Manual Page 28