TA 600 Series User Manual © 2001, ADTRAN, Inc.
TA 600 Series SDSL IAD UIG/61200680L3-31B
Page 42 of 72
Configuring Voice Support – Config
Use the V
OICE
/C
ONFIG
menu to view and set the parameters shown in Figure 15.
Figure 15. Voice/Config Menu
>Call Control
The C
ALL
C
ONTROL
setting is used to configure the correct Voice Gateway protocol for voice signaling control be-
tween the TA 600 and the configured Gateway. The C
ALL
C
ONTROL
setting must be configured correctly before the
voice circuits will work correctly. The TA 600 supports Jetstream, Tollbridge, and CopperCom Voice Gateways.
>VPI
The VPI setting is used to configure the TA 600 virtual path setting used to communicate with the configured Voice
Gateway.
>VCI
The VCI setting is used to configure the TA 600 virtual circuit setting used to communicate with the configured Voice
Gateway.
Comments to this Manuals