ADTRAN 600 SERIES User Manual download pdf (Page 64)

TA 600 Series SDSL IAD UIG/61200680L3-31B

Page 64 of 72

Voice Turn Up

Step Action

From the TA 600 main menu, select the

menu. (Here you set up

the ATM network.)

Select the

ATM C

ONFIG

menu.

Enter the I

DLE

ELLS

format for your network.

Set

ATA

CRAMBLING

appropriately for your network.

Back all the way out to the top level TA 600 menu, and then select the

VOICE

menu. (From this menu, the appropriate Voice information for

working with the Voice Gateway is entered.)

Select

ONFIG

, and from the C

ONFIG

menu, enter the Gateway type

under

ALL CONTROL

and enter the VPI and VCI values for

communicating with that Gateway.

CALL CONTROL

should be set to the Gateway type and the VPI and VCI

values should be set appropriately for your network.

To verify correct setup, use the S

TATUS

menu (under the V

OICE

menu)

to look at the current status of the voice connection.

Under S

TATUS

, you can view the G

ATEWAY

TATS

and information

about the voice PVC along with information about the POTs ports

available on the Gateway.

The G

ATEWAY

TATS

menu should show the Gateway Link is up (if

everything is configured correctly).

A visual inspection of the VOICE LED on the front panel will also yield

the status. Green = up. Red = Down.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70 71 72

Comments to this Manuals

No comments

ADTRAN 600 SERIES User Manual Page 64

Comments to this Manuals

Related products and manuals for Networking ADTRAN 600 SERIES