ADTRAN NetVanta 1000 Series Installation Guide download pdf (Page 33)

NetVanta 1000/1000R Series Hardware Installation Guide Option Modules

NetVanta Serial NIM (P/N 1200866E1/L1)

The NetVanta Serial NIM (shown in Figure 18) can be configured by the user as a V.35, X.21 (V.11), or

EIA 530 interface. This module supports rates up to a maximum of 10 Mbps. An additional V.35

(ADTRAN P/N 1200873L1), X.21 (ADTRAN P/N 1200874L1), or EIA 530 (ADTRAN P/N 1200883L1)

cable is required (refer to Caution, below). See Table A-12 on page 55 for the serial connector pinouts, and

Table A-13 on page 56 for the DBU connector pinouts. An optional DIM is required for dial backup

applications.

Figure 18. NetVanta Serial NIM

Cable length for the Serial NIM should not exceed 25 feet.

SERIAL DBU

Features and Specifications

Operating Mode

• DTE only

Serial Interface

• Supported Standards: ISO 4903 (X.21),

CCITT V.35 Synchronous (V.35),

EIA 530 Synchronous

• Provides V.35, X.21 (V.11), or EIA 530

electrical interface

• Connector: 26-pin smart serial (DTE)

Compliance

• EMC - see Electromagnetic

Compatibility (EMC) Table for the

NetVanta 1224STR/1224R on page 6.

• ETSI TBR1

• ETSI TBR2

• EN 60950

• IEC 60950

• UL/CUL 60950

• AS/NZS 60950

• RoHS Compliant (Telecommunications

exemption)

Environmental

• Operating Temperature: 0°C to 50°C

• Storage Temperature: -20°C to 70°C

• Relative Humidity: Up to 95 percent,

noncondensing

Physical

• Dimensions: 2.75-inch W x 4.25-inch D

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 57 58

No comments

ADTRAN NetVanta 1000 Series Installation Guide Page 33