ADTRAN ATLAS 800 SERIES User Manual download pdf (Page 39)

Appendix A. Dial Plan Interface Configuration

61200773L1-1A ATLAS 800 Series Video Module User Manual 39

TORED

UMBERS

Write Security: 3; Read Security: 5

Enter the numbers to dial using the RS-366 Type II dialing interface in the stored

numbers list. This list can contain up to 10 stored numbers.

Entry number (1-10)

DIAL

Activator to dial or disconnect a call to the specified number.

DESCRIPTION

Alphanumeric character string (up to 20 characters) used as a descriptor for the num-

ber entry. Enter a useful description such as VCon5thFloor(Corp).

DIGITS

Number string (up to 22 digits) to dial.

TYPE

Specifies whether the data rate on the call will be 56 or 64 kbps.

DIAL AS

Specifies the call type used to populate the Bearer Capability Information Element

in the ISDN Call Setup Message. Options include: DIGITAL

(Data), V

OICE

(speech),

or AUDIO

(3.1 kHz audio).

SRC ID

Defines the source ID assigned to this call to be used for internal ATLAS routing.

Source IDs simplify the creation of a dial plan in applications where the criterion for

switching calls to a certain endpoint is a function of which endpoint originated the

call.

Zero (0) is the default ID for all endpoints and all accept numbers. If all default

OURCE

ID values are not modified, calls are routed based only on the dialed num-

ber.

Multiple endpoints may have the same S

OURCE

ID. When creating the CALL

ACCEPT list, specify a S

OURCE

ID (s) as well as a dialed number or range of dialed

numbers to accept on that endpoint.

MIN DS0S

This option will specify the minimum number of DS0s necessary for this switched

call. If the call is negotiated and the minimum DS0s value is not met, the call will

be disconnected. Any value other than 1 requires a BONDING resource to inverse

multiplex the multiple switched channels together.

MAX DS0S

This option will specify the maximum number of DS0s allowed for this switched

call. If the call is negotiated and the maximum DS0s value is not acceptable to the

answering equipment, the call will be disconnected. Any value other than 1 requires

a BONDING resource to inverse multiplex the multiple switched channels together.

EFAULT

ALL

YPE

Write Security: 3; Read Security: 5

Specifies the data rate for single call as either 56 or 64 kbps if not specified in the

Smart Dial string.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 49 50

Comments to this Manuals

No comments

ADTRAN ATLAS 800 SERIES User Manual Page 39

Comments to this Manuals