ADTRAN 6250 Installation Guide Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
NetVanta 6240/6250 Series HIG Physical Description
61700202G1-34B Copyright © 2013 ADTRAN, Inc. 15
Front Panel Features
Status LEDs
The status LEDs are located on the right side of the front panel. The STATUS LED indicates the unit’s
status. The
VOICE LED indicates the status of the voice ports. The NET 1 through NET 4 LEDs reflect
the status of the network interfaces. The
LAN 1 and LAN 2 LEDs reflect the status of the local area
networks (LANs). Table 1 below describes the front panel LEDs.
Rear Panel Design
The NetVanta 6240 Series rear panel is shown below.
Figure 2. NetVanta 6240 Rear Panel Layout
Table 1. NetVanta 6240 Front Panel LEDs
LED Color Indication
STATUS
Off Unit is not receiving power.
Green (flashing) On power up, the STATUS LED flashes rapidly for five
seconds, during which time the user may escape to boot
mode from the CONSOLE port.
Green (solid) Power is on and the unit is functioning normally.
Amber (solid) Power has failed and the unit is in battery backup mode.
Red Power is on, but the self-test failed.
VOICE
Off All ports are inactive or administratively disabled.
Green (flashing) At least one port is ringing.
Green (solid) At least one port is off-hook.
Amber (solid) Port is in test mode.
Red Alarm or fault condition is occurring on the port interface.
NET 1 through
NET 4
Off All ports are inactive or administratively disabled.
Green (solid) Port is functioning normally.
Amber (solid) Port is in test mode.
Red Alarm or fault condition is occurring on the port interface.
LAN 1/LAN 2
Off LAN is administratively disabled or link is down.
Green (solid) The link is up.
Amber (flashing) There is activity on the link.
ETH 0/1
10/100
BASE-T
10/100
BASE-T
ETH 0/2
PRI/CAS
NET 1
T1 0/1
NET 2
T1 0/2
NET 3
T1 0/3
NET 4
T1 0/4
FXO 0/2FXO 0/1
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comments to this Manuals

No comments