ADTRAN 6250 Installation Guide Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
Physical Description NetVanta 6240/6250 Series HIG
16 Copyright © 2013 ADTRAN, Inc. 61700202G1-34B
Rear Panel Interfaces
VOICE Connection
A single 50-pin female amphenol connector, labeled VOICE, provides the interconnect wiring for the
analog FXS/FXO circuits. See Table A-1 on page 33 for voice connector pinouts. The status LED,
labeled
VOICE, is located on the front panel.
FXO Interfaces
The FXO 0/1 and FXO 0/2 interfaces are RJ-11 connectors and provide analog trunks for local call
routing. See
Table A-3 on page 35 for the FXO interface pinouts.
Network Interfaces
The NET 1 T1 0/1 through NET 4 T1 0/4 interfaces are DS1 RJ-48C pin connections. See Table A-4 on
page 35 for the network interface pinouts. The status LEDs, labeled NET 1 through NET 4, are located
on the front panel.
10/100Base-T Ethernet Interfaces
The ETH 0/1 and ETH 0/2 ports are RJ-45 connectors. See Table A-5 on page 35 for the Ethernet
interface pinouts. The status LEDs, labeled
LAN 1 and LAN 2, are located on the front panel.
CRAFT Interface
The CRAFT interface is an EIA-232 serial port (DCE), which provides for local management and
configuration (via a DB-9 female connector). See
Table A-7 on page 36 for the craft interface
pinouts.
Power Connection
The rear panel has a power input to a 120 VAC power supply with an IEC connector. The appropriate
three-prong cable is included in the shipment. Refer to Supplying Power to the Unit on page 27 for
connection details.
Battery Backup Connection
An optional battery backup unit (P/N 1175044L1/L2) is available for use in case of power outages.
The battery backup unit connects to the
BATT port, which also charges the unit during operation. Refer
to Optional Battery Backup Unit (P/N 1175044L1/L2) on page 29 for connection details.
The number of circuits used (1 through 24) is dependent on the model NetVanta 6240.
FXO interfaces use circuits 17 through 24 depending on the model.
Connection directly to an external modem requires a cross-over cable.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Comments to this Manuals

No comments