ADTRAN 600 SERIES User Manual download pdf (Page 54)

TA 600 Series SDSL IAD UIG/61200680L3-31B

Page 54 of 72

1. Using a Telnet program,

to TA 600.

2. Select S

YSTEM

TILITY

PDATE

IRMWARE

3. Select TFTP for T

RANSFER

ETHOD

4. Enter into TFTP S

ERVER

IP A

DDRESS

, the IP address of the network server that was recorded

earlier.

5. Enter into TFTP S

ERVER

ILENAME

, the full path name and filename of the update file that was

recorded earlier.

6. Select S

TART

RANSFER

<+> to start the update process. Enter

to confirm the transfer and

to set up the module to receive the TFTP upload.

When the update has successfully completed, T

RANSFER

OMPLETE

displays in T

RANSFER

TATUS

. The TA 600

restarts immediately and resumes operation.

If an error occurs during the update, an error message will display in the T

RANSFER

TATUS

field. If this occurs,

return to Step 3 and attempt the update again. If the same error occurs, contact ADTRAN Technical Support.

During the TFTP upload, various status messages display to indicate progress. The following table describes these

messages.

Perform Steps Below in the Order Listed

During the TFTP upload process, various status messages display in C

URRENT

PDATE

TATUS

to indicate progress. The table below describes these messages.

Message Meaning

Contacting Server Indicates communication with the TFTP network server

is trying to be established with the specified server

address in the TFTP Server IP Address field.

Beginning TFTP

Transfer

Indicates communication with the TFTP network server

has been established and the update file is being trans-

ferred between TA 600 and the TFTP network server.

Completed Indicates the TA 600 product successfully received the

update file.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 71 72

Comments to this Manuals

No comments

ADTRAN 600 SERIES User Manual Page 54

Comments to this Manuals

Related products and manuals for Networking ADTRAN 600 SERIES