ADTRAN NetVanta 160 User Manual download pdf (Page 26)

NetVanta 160 Series Wireless Configuration Guide Configuring AOS AP Virtual Access Points

Basic VAP Settings

The Basic Settings tab for the VAP is located in the Virtual Access Point Configuration menu, accessed

by selecting the VAP ID hyperlink or Add/Modify button on the menu shown in Figure 21 on page 25. On

the Basic settings tab (Figure 22), you can define the SSID, turn off SSID broadcast, enable interclient

separation, and describe the VAP.

Figure 22. VAP Basic Settings Tab Menu

If the SSID Broadcast Mode is not checked, the AP beacon will no longer broadcast the SSID. This

provides a minimal amount of security and it is recommended.

Enabling Interclient Separation prevents clients within the VAP from communicating directly with each

other.

When the basic settings are configured, select the Apply button to activate them on the AC. To apply the

changes to the AP, refer to Applying the Settings on page 20.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 57 58

No comments

ADTRAN NetVanta 160 User Manual Page 26