ADTRAN SLC-5 U-BR1TE III User Manual download pdf (Page 99)

Chapter 8. Telnet/Terminal Menus

61202052L1-1 TSU 100 User Manual

8-5

Remote Menu Access

Remote Menu Access displays TELNET menus for a remote

device. This may be another TSU/TDU or any other ADTRAN

product that supports TELNET via its EIA-232 chain port. After

selecting this option, the user may choose to connect to a device

entered in the Unit Access Table or enter a Unit ID for a unit not

in the Unit Access Table.

<CTRL> + X

terminates the session

and returns to the TSU 100 Main Menu.

Management Configuration

This menu sets management information, such as SNMP com-

munity names and trap destination addresses.

Unit Access Table

This menu is used to create and edit the Unit Access Table.

This table stores the Unit ID, Passcode, and Unit Type for units

connected via chain ports or connected remotely to the TSU/

TDU (see Figure 8-3 on page 8-6). An entry in the table is

required only to support proxy SNMP MIB access or polling.

For MIB access, an entry is required only if the unit's passcode

is not the same as the Default Unit Passcode, or the unit is a

single port TSU Standalone.

It is not necessary to have an entry in this table for a remote unit

in order to TELNET to it or forward SNMP traps from it. In the

TELNET case, the Remote Menu Access menu is selected from the

Main Menu and a Unit ID is entered which may or may not be in

the Unit Access Table.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 135 136

No comments

ADTRAN SLC-5 U-BR1TE III User Manual Page 99