ADTRAN T3SU 300 User Manual Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 141
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
Chapter 3. Configuration
54 T3SU 300 User Manual 61202217L1-1C
Local IP Address
Enter the T3SU 300 IP address. This IP address applies to the
Ethernet or auxiliary port (when configured for PPP or SLIP). This
address is available from the network administrator.
Subnet Mask
Enter the subnet mask of the T3SU 300. This address is available
from the network administrator.
Gateway IP Address
Enter the gateway IP address of the T3SU 300. This address is
necessary only if the T3SU 300 and the network manager are
connected through a gateway node. If an IP packet is to be sent to a
different network, the unit sends it to the gateway.
Remote IP Address
Enter the remote T3SU 300’s IP address to provide network
management access through the local T3SU 300. See the section
Remote SNMP Management Application on page 110 for more
information.
IP Security
Enable or disable the IP Security option. If enabled, the unit accepts
management commands and Telnet sessions from the IP addresses
entered into the
IP HOSTS fields.
IP Hosts
Enter up to 16 IP addresses of management stations from which the
unit should accept management commands. These addresses are
only applicable if
IP SECURITY is enabled.
Page view 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 140 141

Comments to this Manuals

No comments