ADTRAN Vanta 1335 Installation Guide download pdf (Page 21)

NetVanta 1335 Series Hardware Installation Guide Option Modules

4. OPTION MODULES

The NetVanta 1335 Series support several option modules designed to meet a variety of networking

requirements. The option modules include plug-in NIMs and plug-on DIMs.

NIMs are cards that plug directly into the option module slot located on the rear of the base unit. These cards

provide the following types of interfaces:

• NetVanta 56K/64K NIM (P/N 1200861L1) on page 22

• NetVanta T1/FT1 NIM (P/N 1202862L1) on page 23

• NetVanta T1/FT1 + DSX-1 NIM (P/N 1202863L1) on page 24

• NetVanta Dual T1 NIM (P/N 1200872L1/1202872L1) on page 25

• NetVanta E1/FE1 NIM (P/N 1200868E1/L1) on page 26

• NetVanta E1/FE1 + G.703 Drop NIM (P/N 1200878E1/L1) on page 27

• NetVanta Serial NIM (P/N 1200866E1) on page 28

• NetVanta SHDSL NIM, Annex A (P/N 1200936E1) on page 29

• NetVanta SHDSL NIM, Annex B (P/N 1200937E1) on page 30

• NetVanta ADSL NIM, Annex A (P/N 1202869E1) on page 31

• NetVanta ADSL NIM, Annex B (P/N 1202889E1) on page 32

DIMs are plug-on cards that plug directly on to the NIM prior to installation into the base unit. A DIM must be

plugged on to a NIM in order for the interfaces on the NIM to be active. The NetVanta supports the following

DIMs:

• NetVanta Analog Modem DIM (P/N 1200864L1) on page 33

• NetVanta ISDN BRI DIM (P/N 1200865L1) on page 34

• NetVanta ISDN S/T DIM (P/N 1200875L1) on page 35

This section describes each module, providing individual card specifications and features. Refer to Appendix A

on page 43 for pinouts. Installing Dial Backup and Network Interface Modules on page 39 provides information

on card installation.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

No comments

ADTRAN Vanta 1335 Installation Guide Page 21