ADTRAN Vanta 1335 Installation Guide download pdf (Page 41)

NetVanta 1335 Series Hardware Installation Guide Unit Installation

Installing a CompactFlash Card

The CompactFlash slot supports only ADTRAN-provided 1 GB CompactFlash cards. Follow these

instructions when installing a card

Figure 18. CompactFlash Card Installation

Your NetVanta unit is now ready to be configured and connected to the network. For information on

configuration for a specific application, refer to the configuration guides provided on the ADTRAN Support

Community. For details on the command line interface (CLI), refer to the AOS Command Reference Guide. All

other related documents are also available online at http://supportforums.adtran.com

The CompactFlash card is hot-swappable and can be inserted or removed while power is

applied to the unit.

Instructions for Installing a CompactFlash Card

Step Action

1 Slide the module into the CompactFlash slot until the card is firmly seated against the chassis.

2 The CompactFlash options will now be available in the GUI and the AOS CLI.

CompactFlash

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

No comments

ADTRAN Vanta 1335 Installation Guide Page 41