ADTRAN Vanta 1335 Installation Guide download pdf (Page 23)

NetVanta 1335 Series Hardware Installation Guide Option Modules

NetVanta T1/FT1 NIM (P/N 1202862L1)

The NetVanta T1/FT1 NIM (see Figure 5) provides a T1 WAN interface for the NetVanta. This module provides

a full T1 or fractional T1 network interface. Refer to Appendix A on page 43 for WAN-T1 and DBU connector

pinouts. An optional DIM is required for dial backup applications.

Figure 5. NetVanta T1/FT1 NIM

WAN-T1 DBU

Features and Specifications

Operating Modes

• Frame Relay, Multilink Frame Relay

• PPP, Multilink PPP

• HDLC

T1/FT1 Interface

• Supported Standards: AT&T TR 62411,

AT&T TR 65016, ANSI T1.403,

Bellcore TR 194

• Line Rate: 1.544 Mbps +

75 bps

• Line Code: AMI or B8ZS

• Framing: D4 (SF) or ESF

• FT1 Line Rate: DS0 channelized (multiples

of 64 kbps)

• Input Signal: 0 to -36 dB (DS1)

• Line Build-Out: 0, -7.5, -15, -22.5 dB

(long), 0 to 655 ft (short)

• DS0 Assignment: Programmable

• Connector: RJ-48C

Clock Source

•Network

•Internal

Diagnostics

• Test Pattern Generation and Detection:

511, QRSS, all ones, all zeros

• Network loopbacks (local and remote);

responds to both inband and FDL loop

codes

• Alarm generation and detection

• Network and user sets of performance data

(15 minutes and 24 hours)

Compliance

• EMC - see Electromagnetic Compatibility

(EMC) Table on page 6.

• ACTA/FCC Part 68

• IC CS-03

• UL/CUL 60950

Environmental

• Operating Temperature: 0°C to 50°C

• Storage Temperature: -20°C to 70°C

• Relative Humidity: Up to 95 percent,

noncondensing

Physical

• Dimensions: 2.75-inch W x 4.25-inch D

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Comments to this Manuals

No comments

ADTRAN Vanta 1335 Installation Guide Page 23

Comments to this Manuals

Related products and manuals for Networking ADTRAN Vanta 1335