Unit Installation NetVanta 1335 Series Hardware Installation Guide
40 Copyright © 2012 ADTRAN, Inc. 61700515E2-34D
Figure 17. NIM and DIM Installation
Instructions for Installing the NIMs
Step Action
1 Remove power from the unit.
2 Use a screwdriver to remove the cover plate from the appropriate option slot in the NetVanta
base unit.
3 Slide the option module into the option slot until the module is firmly seated against the chassis.
4 Secure the pins at both edges of the module.
5 Connect the cables to the associated device(s).
6 Restore power to the unit.
DBU
WAN-T1 DSX-1
AC Power
Comments to this Manuals