ADTRAN Stub Routing Specifications download pdf (Page 324)

100

101

Ethernet Interface Configuration Command Set Command Reference Guide

snmp trap

Use the snmp trap command to enable all supported Simple Network Management Protocol (SNMP)

traps on the interface.

Syntax Description

No subcommands

Default Values

By default, all interfaces (except virtual frame relay interfaces and sub-interfaces) have SNMP traps

enabled.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), DDS (dds 1/1), serial (ser 1/1), virtual

frame relay (fr 1), and SHDSL (shdsl 1/1) interfaces.

Command History

Release 1.1 Command was introduced

Usage Examples

The following example enables SNMP capability on the Ethernet interface:

(config)#

interface eth 0/1

(config-eth 0/1)#

snmp trap

1 2 ... 319 320 321 322 323 324 325 326 327 328 329 ... 567 568

Comments to this Manuals

No comments

ADTRAN Stub Routing Specifications Page 324

Comments to this Manuals

Related products and manuals for Networking ADTRAN Stub Routing