ADTRAN Stub Routing Specifications download pdf (Page 516)

100

101

Line (Console) Interface Config Command Set Command Reference Guide

LINE (CONSOLE) INTERFACE CONFIG COMMAND SET

To activate the Line (Console) Interface Configuration command set, enter the line console 0 command at

the Global Configuration Mode prompt. For example:

Router>

enable

Router#

configure terminal

Router(config)#

line console 0

Router(config-con 0)#

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

do on page 558

end on page 559

exit on page 560

All other commands for this command set are described in this section in alphabetical order.

databits <option> on page 517

flowcontrol [none | software] on page 518

line-timeout <minutes> on page 519

parity <option> on page 522

password <password> on page 523

speed <rate> on page 524

stopbits <option> on page 525

1 2 ... 511 512 513 514 515 516 517 518 519 520 521 ... 567 568

Comments to this Manuals

No comments

ADTRAN Stub Routing Specifications Page 516

Comments to this Manuals

Related products and manuals for Networking ADTRAN Stub Routing