ADTRAN Stub Routing Specifications download pdf (Page 379)

100

101

Command Reference Guide SHDSL Interface Configuration Command Set

snmp trap

Use the snmp trap command to enable all supported Simple Network Management Protocol (SNMP)

traps for the SHDSL interface.

Syntax Description

No subcommands

Default Values

By default, all interfaces (except virtual frame relay interfaces and sub-interfaces) have SNMP traps

enabled.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), DDS (dds 1/1), serial (ser 1/1), virtual

frame relay (fr 1), and SHDSL (shdsl 1/1) interfaces.

Command History

Release 1.1 Command was introduced

Release 3.1 Command was extended to the SHDSL interface

Usage Examples

The following example enables SNMP on the SHDSL interface:

(config)#

interface shdsl 1/1

(config-shdsl 1/1)#

snmp trap

1 2 ... 374 375 376 377 378 379 380 381 382 383 384 ... 567 568

Comments to this Manuals

No comments

ADTRAN Stub Routing Specifications Page 379

Comments to this Manuals

Related products and manuals for Networking ADTRAN Stub Routing