ADTRAN Stub Routing Specifications download pdf (Page 513)

100

101

Command Reference Guide Loopback Interface Configuration Command Set

loopback remote inband

Use the loopback remote inband command to inject the selected inband loop-up pattern into the data

stream to cause a loopback at the far-end. Use the no form of this command to inject a loop-down pattern

into the data stream to cause an existing inband loopback at the far-end to cease.

Syntax Description

No subcommands

Default Values

By default, this command is enabled.

Command Modes

(config-loop 1)# Loopback Interface Configuration Mode required

Command History

Release 4.1 Command was introduced

Usage Examples

The following example injects a loop-down pattern into the datastream, causing existing loopbacks at the

far-end to stop:

(config-loop 1)#

no loopback remote inband

1 2 ... 508 509 510 511 512 513 514 515 516 517 518 ... 567 568

Comments to this Manuals

No comments

ADTRAN Stub Routing Specifications Page 513

Comments to this Manuals

Related products and manuals for Networking ADTRAN Stub Routing