Total Access 3000/3010 T1-OR/NIU Installation and Maintenance Practice
2 61181310L2-5D
Description
The T1-OR/NIU enhances existing T1 repeater spans. The T1-OR/NIU provides trouble-
shooting capabilities through either locally or remotely-programmed options and loopbacks.
The T1-OR/NIU receive-transmission-path provides a long-haul regenerator, followed by a
provisionable DSX pre-equalizer, and its transmit path provides a short-haul regenerator
followed by a provisionable transmit line build-out. The T1-OR/NIU is equipped with a DSX-
level interface to the equipment side and provides independent monitoring jacks at DSX and
T1 sides. In addition, the T1-OR/NIU provides both DSX and multiplexer (MUX) position
connections with appropriate switching logic.
Features
The basic features of the Total Access 3000/3010 T1-OR/NIU include the following:
• Screen provisioning and troubleshooting via menus through the System Controller Unit (SCU)
• ESF and SF compatibility
• Provisionable DS1 Line Build Out (0 to –22.5 dB)
• Provisionable DSX–1 Line Build Out (0 to 655 feet in 133 foot increments)
• AMI and B8ZS compatible
• Provisionable span power
• Addressable loopbacks
• DSX monitor jacks
• Front panel Bantam jacks and span power test points
• Seven day storage and real-time performance monitoring information
Compliance
Table 1 shows the compliance codes for the T1-OR/NIU. The T1-OR/NIU is NRTL listed to the
applicable UL standards. Install the T1-OR/NIU in a restricted access location and in a type
“B” or “E” enclosure only.
Table 1. Compliance Codes
Configuration Code Input Output
Power Code (PC) F X
Telecommunication Code (TC) – X
Installation Code (IC) A –
Comments to this Manuals