ADTRAN Total Access 3000 Specifications download pdf (Page 26)

Total Access 3000/3010 T1-OR/NIU Installation and Maintenance Practice

18 61181310L2-5D

Network Interface Unit Mode

The Provisioning menu for the NIU mode (Figure 13) is identical to the OR mode with the

exception of Span Power. There is no span power in the NIU configuration. See the note on the

screen.

Figure 13. Provisioning Menu-NIU Mode

NOTE

If P4 option straps are in the “span power disabled” position, span

power is disabled regardless of software screen indication.

Table 6 provides descriptions and defaults for the Provisioning menu options.

CAUTION

Do not make provisioning option changes when the Service State is

set to In Service. Make option changes in an Out-of-Service state

only.

Shelf: 1 Slot: 12 Total Access System 12/29/05 09:29

Unacknowledged Alarms: None

CIRCUIT ID:

Provisioning

1. DSX-1 Line Buildout = 0-133 Feet

2. DSX-1/DS1 Line Code = B8ZS

3. DSX-1/DS1 Framing = ESF

4. Loopback Timeout = 120 Min

5. DS1 TX Level = 0 dB

6. Network Source = DSX/DS1

7. Service State = OOS Unassigned

8. Span Power = Disabled

9. External Alarms = Disabled

10. Card Configuration = T1-NIU

11. AIS = Disabled

Span Power option unavailable in T1-NIU configuration.

Switch to T1-OR configuration first.

D. Restore Factory Defaults

‘?’ - System Help Screen

Selection:

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

No comments

ADTRAN Total Access 3000 Specifications Page 26